Carcassing 47mm x 75mm Kiln Dried C24 stock, Devon
Our carcassing stock is strength graded C24, supplied by an established importer. Quality is high and the supply from Sweden is both reliable and consistent. The timbers are regularised and planed-all-round for consistency of size and easy handling. We have the timbers pressure-treated with preservative at the docks and transported down to ourselves.
Carcassing stock section sizes
We keep good stocks of 47mm x 75mm carcassing. However we also aim to rotate stock as quickly as feasible, this means we might run low for a few days on some lengths. Incoming carcassing deliveries from Scandinavia are received on a regular basis. Please note that because the imported timber is regularised and planed all-round most of our timber is now 44mm. Because architects often now specify C24 graded timber it means that these timbers have to be imported. Our UK home-grown timber grows too quickly to achieve C24 grade.
Carcassing timber stocks are certificated, unless marked otherwise. We sell both FSC and PEFC certified timber. Both organisations are dedicated to promoting sustainable forest management. The process includes independent timber audits and third-party certification
47 x 75mm (aka 3x2) KD 4RC Pressure Treated C24
47 x 100mm (aka 4x2) KD 4RC Pressure Treated C24
47 x 125mm (aka 5x2) KD 4RC Pressure Treated C24
47 x 150mm (aka 6x2) KD 4RC Pressure Treated C24
47 x 175mm (aka 7x2) KD 4RC Pressure Treated C24
47 x 200mm (aka 8x2) KD 4RC Pressure Treated C24
47 x 225mm (aka 9x2) KD 4RC Pressure Treated C24
47 x 250mm (aka 10x2) KD 4RC Pressure Treated C24
Carcassing timber lengths
Most of our carcassing timbers are stocked at multiples of 600mm intervals, that is 2.4m, 3.0m, 3.6m, 4.2m and 4.8m. It is possible to check current stock availability by viewing the webpage for the timber you require. Our stock levels are live, each stock transaction is updated as it happens.
The uses of carcassing timbers
Our carcassing timbers are Kiln Dried (KD) which gives them better stability then planed and regularised for a smooth and consistent finish. It is more pleasant to handle than most sawn carcassing. The finish is very similar to CLS timber. All of our carcassing timbers, with the exception of some CLS, is supplied pressure treated. Popular uses for 47mm x 75mm carcassing is for larger garden sheds, lean-to's and smaller agricultural buildings. The pressure treated (aka tanalised) carcassing is also used for decking joists and studwork. If these are exposed then further preservative treatment is advised to prolong service life. Again, for limited-protection timbers, a tin of Ronseal End Grain protector for any cross cuts in joists.
Finish | Smooth |
---|---|
Certification | PEFC |
Material | Timber |
Lead time | 1-2 Days |