1.8m x 1.8m (6x6ft) Milano Fence Panel (FSC), Code MIL06

Panel Construction

There are 4 heights available of Milano Fence Panel:1.8m; 1.5m; 1.2m and 0.9 metre. Panels are constructed using 45mm x 45mm softwood framing using slow grown pine. These frames are constructed with open mortice and tenon joints which provide the panels with rigidity

The slats for the panels are 8mm thick and 95mm, and all timber components in these panels are pressure treated for longevity.

One indication of good quality, the panel slats are fixed with stainless steel screws. These stainless screws are less likely to react with the timber preservative. Other metals will tend to react with the preservative and lead to an unsightly bleeding on the panel surface.

Milano European Fence Panel, MILO-4 ,1800mm x 1200mm

These Milano European panels are replacements for our SH (Square Horizontal Lattice) Panels which had been introduced in March 2010. Both panel ranges are top quality products, but the Milano product has a shorter supply chain giving us better control over stock levels.

Milano Fence Panel Design

There are four heights of Milano panel available varying from 1800mm down to 900mm. In common with most of our planed-finish panels the Milano Panels feature 45mm x 45mm softwood framing. These frames are constructed with open mortice and tenon joints which provide the panels with rigidity

These slats are fixed with stainless steel screws. These stainless screws are less likely to react with the timber preservative. Other galvanised, and sherardised screws start to react with the preservative and lead to an unsightly bleeding on the panel surface

The Milano panels are decorative but offer durability by combining a robust specification, quality materials and pressure treated timbers. Also available to complement the panels are a selction of European styled gatesthe Ufford gates.

European Panel Manufacture

The fencing Horizontal slats are machined to a smooth finish and then secured with vertical battens. This helps to produce a sturdy privacy panel that reduces wind load by allowing some air to pass through the structure. Each panel is topped with a diamond lattice which gives some privacy without restricting too much light into the garden.

These quality fence panels are finished with a channelled frame around all panel edges. The panels are manufactured in Eastern Europe and then exported to the Eastern coast of England for distribution

All our fence panels are pressure treated with preservative to increase service life. These fencing panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight.

The panels can be installed with sawn, or planed, 100mm (4”) posts. We also stock incised 100mm posts which come with a Manufacturer’s 15-Year warrant. Other associated products include quick-setting Postcrete, Clips, Gates, Osmo Natural Woodstains and sawn, or planed, Gravel Boards.

Panel Size Options

Half-panels are not available, but different size panels can be cut down to size. Our Trade customers usually place batten down both faces of the panel at the desired size and then saw the panel down to whatever is required.

Panel Size (MIL03) 1.8 metre wide x 900mm high (aprox. 6' wide x 3' high

Panel size (MIL04) 1.8 metre wide x 1.2 metre high (approx. 6’ wide x 4’ high)

Panel size (MIL05) 1.8 metre wide x 1.5 metre high (approx. 6' wide x 5' high)

Panel size (MIL06) 1.8 metre wide x 1.8 metre high (approx. 6’ wide x 6’ high)

If you want any more details feel free to contact or visit us

More Information