1.8 x 1.5m (6ft x 5ft) Milano Fence Panel (FSC) Milo-3
These Milano European fence panels are replacements for our SH (Square Horizontal Lattice) panels, introduced in March 2010. Both panel ranges are top quality products, but the Milano product has a shorter supply chain giving us better control over stock levels. There are four heights available 1800mm, 1500mm, 1200mm and 900mm.
Panel design
These panels are constructed using 45mm x 45mm softwood framing. The frames are constructed with open mortice and tenon joints which provide the panels with rigidity
The slats for the panels are 8mm thick and 95mm wide, and all timber components in these panels are pressure treated for longevity.
An indication of the product’s quality, the panel slats are fixed with stainless steel screws. These stainless screws are less likely to react with the timber preservative. Lower price panels use galvanised or sherardised fixings which may react with the preservative and can lead to an unsightly rust bleeding on the panel surface.
European Panel Manufacture
The fencing Horizontal slats are machined to a smooth finish and then secured with vertical battens. This helps to produce a sturdy privacy panel that reduces wind load by allowing some air to pass through the structure. Each panel is topped with a diamond lattice which gives some privacy without restricting too much light into the garden.
These quality fence panels are finished with a channelled frame around all panel edges. The panels are manufactured in Eastern Europe and then exported to the Eastern coast of England for distribution
All our fence panels are pressure treated with preservative to increase service life. These fencing panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight.
Panel installation
The panels can be installed with sawn, or planed, 100mm (4”) posts. We also stock incised 100mm posts which come with a Manufacturer’s 15-Year warrant. Other associated products include quick-setting Postcrete, Clips, Gates, Osmo Natural Woodstains and sawn, or planed, Gravel Boards.
Panel Size Options
Half-panels are not available, but different size panels can be cut down to size. Our Trade customers usually place batten down both faces of the panel at the desired size and then saw the panel down to whatever is required.
Panel Size (MIL03) 1.8 metre wide x 900mm high (approx. 6' wide x 3' high
Panel size (MIL04) 1.8 metre wide x 1.2 metre high (approx. 6’ wide x 4’ high)
Panel size (MIL05) 1.8 metre wide x 1.5 metre high (approx. 6' wide x 5' high)
Panel size (MIL06) 1.8 metre wide x 1.8 metre high (approx. 6’ wide x 6’ high)
If you want any more details feel free to contact or visit us.
| Lead time | days |
|---|
Write Your Own Review
