Osmo End Grain Sealing Wax 375 ml
Osmo End Grain Sealing Wax protects the end grain from cracks during all elements of weathering. Minimises the water absorption, as well as the seasoning of the end grains. The surface is water and dirt resistant. Swelling and shrinking as well as ‘bleeding’ of the contents of the wood will be reduced. It is clear and is therefore universally applicable.
Protects edge grain of decking against cracks
Prevents wood ingredients from bleeding
High weather resistance
Safe for human, animal and plant once dry
Very water and dirt resistant
Minimises wood swelling and shrinkage
Microporous, breathable finish which does not crack, peel or flake
Suitable for interior and exterior use
Application with Osmo Flat Brush or lint-free cloth
Recoat with one coat when signs of wear become visible
Dry Time of 3-4 hours,
Coverage of 5sq metres per litre of approx. 600 decking boards on both ends
Method of Application
The wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo End Grain Sealing Wax is ready to use. Do not thin. Stir well.
The finished surface is influenced by several factors, including the condition of wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush, apply generously to end grains. To achieve an optimal protection for strongly absorbing end grains, Osmo recommend applying the sealing wax two times wet-in-wet or after drying carry out a second coat.
Osmo End Grain Sealing Wax is clear and therefore it can be applied universally.
Please only apply to end grains. Not for area treatment. Wipe away any excess wax from other surfaces with a cloth.
Oils enhance the natural tone of wood (permanent wet effect). After drying, we recommend coating the other wood surfaces with Osmo wood finishes (e.g. Bangkirai-Oil, Massaranduba-Oil, Country Colour or Natural Oil Woodstain).
Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.
Care and maintenance
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.
Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Apply to the raw end grain only.
To achieve the best protection of strongly absorbing wood grain we recommend to apply 2 coats successively, wet on wet.
Recommended application amount of 150ml/m² for first coat, and 50 ml/m² for the second coat.
Brand | Osmo |
---|---|
Lead time | 1-2 Days |