Liberon Tough Deck Clean and Revive 2.0 L
Product Code:
FIXFI_L_REVIVE_2L
Liberon Tough Deck Clean and Revive 2.0 L
Application
Apply on bare or oiled wood (for other finishes, use a stripper). Brush your wood to remove excess dirt. Dilute the cleaner in a proportion of 1 to 2, for example 1L of product in 2L of warm water.
Pressure washer application: Put your mixture into the tank of the pressure washer. Spray the surfaces to be cleaned. Leave it for 10 minutes and then rinse with clean water.
Manual brush application: Put your mixture into a watering can or garden sprayer. Spray the surfaces to be cleaned. Leave for 10 minutes and then rinse with clean water. Brush vigorously with a hard bristle brush or patio brush. Remove dirt progressively. Rinse thoroughly with water.
Advice
In the case of stubborn stains or heavily soiled wood, apply a few drops of undiluted cleaner. Scrub with a hard bristle brush and then rinse with water.
Rinse the product well.
Allow to dry for 24 to 48 hours before applying the finishing product. Test first on an inconspicuous area.
Remove as much of the product as possible from the tools after use. Do not dispose of residues and washing water/solvents in the sink, toilet, sewer, bin, etc., in order to avoid discharge into the environment.
