Apex Shed, Premier, ex.19mm Shiplap, Tanalised 8' x 6'

Traditional TGV floor & roof construction
Tanalised framing, floor & cladding
HD Galvanised door furniture
Free delivery for local area
Needs able bodied person for offload
Treat with water repellent
Supplied in sectional format
15 Year Manufacturers Warranty

Firstly the 8 x 6 Tanalised Apex shed is constructed using pressure treated (Tanalith-E) timber to increase the service life of the structure. The walls are made from ex-19mm x 125mm shiplap cladding which has a generous 17mm lap to help minimise water ingress during prolonged dry weather spells. Each section is framed with ex-38mm x 50mm timber, which when assembled produces a robust shed.

The door height is approx. 1.75m (5’ 8”), the external eaves height is approx. 1.96m (6ft 4 inch). Ground level to the top of the Apex is approximately 2.1 metres (approx. 7’) This height calculation includes the width/height of 75mm posts to sit the shed on. Internal heights are 1.77m and 1.91metres.

The width of the standard door entrance is 730mm (approx. 2ft 4″), which should be sufficient for most garden machinery, including lawnmowers. Doors are constructed so they can be hung on the right or left hand side of the opening. The window uses perspex to reduce breakages

Both the shed floor and shed roof are made using tanalised ex-22mm x 125mm tongue & grooved timber boards (finish sizes 18mm x 110mm) with a 9mm tongue. It is very unusual to find any shed using this quality of material, especially at this price. Finally a quantity of 20Kg roofing felt is included for the customer to finish the roof after assembly.

Treated-Right 15 Year Manufacturers Warranty

This product is pressure treated using Next generation TANALITH E wood preservative which provides a 15 year TREATED-RIGHT performance warranty against wood decay and insect attack (terms and conditions apply). There are Terms & Conditions with their Warranty, these are available on request.

Standard Apex shed sizes

We carry the following sizes of Apex sheds for next day delivery from Ipplepen, but if stocks are low then lead time is approx. 14-21 days.

1.8m x 1.2m (6′ x 4′) single window
2.4m x 1.8m (8′ x 6′) single window
3.0m x 2.4m (10′ x 8′) 2 x single windows

Alternatively we have a range of Rowlinsons Sheds, timber Workshops and Summerhouses available with free UK Mainland delivery.

8 x 6 Tanalised Apex: Delivery and assembly

At Southern Timber we offer a kerbside delivery through the Torbay, Teignbridge, Exeter, South Hams and Plymouth areas. While most deliveries are free sometimes they may be chargeable depending on location and the total value of the order.

Our deliveries of sheds in Devon and Cornwall are arranged for manual offload because they are not ideally suited to a mechanical offload. Therefore with shed deliveries we require an able bodied person to be onsite to help the driver offload the sections of the shed which are bulky as well as being heavy.

Each shed is delivered in sectional kit form and they are relatively easy to assemble. A concise set of assembly instructions is supplied with each shed. Where necessary we can supply details of tradesmen to erect your shed in most areas of South Devon. Their fee will vary depending on the traveling time and amount of work involved. To maximise the life of your shed use a quality water repellent such as Thompson’s Water Seal on the shed timbers. Further details are attached to the inside of each and every shed door. Ensure your shed is positioned on timber post bearers as described below

8 x 6 Tanalised Apex: Shed Assembly

All our sheds should have a minimum clearance of 300mm (12”) all around to allow for shed assembly and for maintenance. An earth base is suitable for this shed, but paving slabs or gravel would be better. The most important thing is that the site is self draining and that UC4 (user Class 4) pressure treated posts are used as bearers under the shed. Even tanalised structural timbers are not sufficient, only UC4 (and above) timbers are treated for use in ground contact applications. The shed manufacturer stress as part of their 15 Year Warranty that “Shed bearers must be Use Class 4 treated. If the shed is positioned directly on to a concrete base then this must have drainage to avoid standing water.”

Please note the Assembly Instructions for the 10’ x 8’ shed are the same as the 8’ x 6’ but please ensure you increase the size of the base accordingly.

More Information