Shed Construction and Tanalith Treatment

The Apex shiplap sheds are constructed using pressure treated (Tanalith-E) timber to increase the service life of the structure. The walls are made from ex-19mm x 125mm shiplap cladding which has a generous 17mm lap to help minimise water ingress during prolonged dry weather spells. Each section is framed with ex-38mm x 50mm timber, which when assembled produces a robust shed.
The door height is approx. 1.75m (5’ 8”), the external eaves height is approx. 1.96m (6ft 4 inch) and from ground level to the top of the Apex is approximately 2.1 metres (approx. 7’) This height calculation includes the width/height of 75mm posts to sit the shed on. Internal heights are 1.77m and 1.91metres.

The width of the standard door is 730mm (approx. 2ft 4"), which should be sufficient for most garden machinery, including lawnmowers. Doors are constructed so they can be hung on the right or left hand side of the opening. The window uses perspex to reduce breakages

Both the shed floor and shed roof are made using tanalised ex-22mm x 125mm tongue & grooved timber boards (finish sizes 18mm x 110mm) with a 9mm tongue. It is very unusual to find any shed using this quality of material, especially at this price. A quantity of 20Kg roofing felt is included for the customer to finish the roof after assembly. Delivery is free throughout most of South Devon, please verify your Post Code when ordering.

Treated-Right 15 Year Manufacturers Warranty

Through the use of next generation TANALITH E wood preservative, quality timber and stringent production methods our Shed Supplier offers a 15 Year Treated-Right Performance Warranty on the Premier shed range they supply. There are Terms & Conditions with their Warranty, these are available on request

Standard Apex shed sizes

The following size Apex sheds are normally kept in stock at our Ipplepen Yard

1.8m x 1.2m (6' x 4') single window
2.4m x 1.8m (8' x 6') single window
3.0m x 2.4m (10' x 8') 2 x single windows

We carry these all sizes of Apex sheds for next day delivery from Ipplepen, but if stocks are low then lead time is approximately 14-21 days.

Apex Sheds in Devon:Delivery and assembly

At Southern Timber we offer a kerbside delivery through the Torbay, Teignbridge, Exeter, South Hams and Plymouth areas. While most deliveries are free sometimes they may be chargeable depending on location and the total value of the order.

Our deliveries of sheds in Devon and Cornwall are made in sectional form, they are not ideally suited to a mechanical offload. Therefore with shed deliveries we require an able bodied person to be onsite to help the driver offload the sections of the shed which are bulky as well as being heavy.

Each shed is delivered in sectional kit form and they are relatively easy to assemble. A concise set of assembly instructions is supplied with each shed. Where necessary we can supply details of tradesmen to erect your shed in most areas of South Devon; their fee will depend on the travelling time and amount of work involved. To maximise the life of your shed use a quality water repellent such as Thompson's Water Seal on the shed timbers. Further details are attached to the inside of each and every shed door. Also ensure your shed is positioned on timber post bearers as described below.

Shed Assembly

All our sheds should have a minimum clearance of 300mm (12”) all around to allow for shed assembly and for maintenance. An earth base is suitable for this shed, but paving slabs or gravel would be better. The most important thing is that the site is self draining and that UC4 (user Class 4) pressure treated posts are used as bearers under the shed. Even tanalised structural timbers are not sufficient, only UC4 (and above) timbers are treated for use in ground contact applications. The shed manufacturer stress as part of their 15 Year Warranty that “Shed bearers must be Use Class 4 treated. If the shed is positioned directly on to a concrete base then this must have drainage to avoid standing water.”

Guttering Options

In 2016 we took the decision to stock guttering products, mainly due to demand from customers buying our tanalised timber garden sheds. To make things easier for the tradesman we have calculated that the following guttering products should complement our Premier Tanalised Apex 6’ x 4’ shed

2 x 2metre 76mm Black MiniFlo Gutters (RGM2)
4 x 76mm Black MiniFlo Fascia Brackets (RKM1)
2 x 76mm Black MiniFlo Stop End Outlets (ROM2)
2 x 76mm Black MiniFlo External Stop Ends (REM1)
4 x 50mm Black MiniFlo Pipe Clips (RCM1)
2 x 2 metre Black MiniFlo Down Pipe (RPM2)
2 x 50mm Black MiniFlo Down Pipe Shoes (RBM3)

Fixing screws are not supplied with our shed guttering kits, FloPlast recommend using 25mm x 5mm screws but it is important that screw fixings do not protrude through the timbers to the shed interior.

Our Premier Tanalised sheds feature roofs with a small overhang; this should enable the MiniFlo down pipe to run vertically down the shed side. This is suitable for where the rainwater is running down to the ground through a down-pipe shoe to a suitable soak away.

If you are planning to use a water butt then select our rainwater retention option, this involves the use of 112° offset bends onto each down pipe to create a swan neck.

More Information