75 X 200mm KD 4RC Treated C24
Product Code:
CK_075X200_TALL_PEFC
75 x 200mm KD 4RC Pressure Treated C24 Graded Timber from Scandinavia
The growth in open plan living areas has meant increased demand for larger section size, and length, of structural timbers. British timber grows too quickly to grade at C24 so we buy this C24 regularised timber from Scandinavia. This is high quality C24 Graded Timber stock. We purchase packs of regularised timber, the timbers within each pack having consistent dimensions and a smoother planed finish than traditional sawn carcassing. Most regularised timber has “eased” edges, the machining processing means that the nominal sizes are reduced slightly.
Timbers all pressure treated with preservative
Our timber carcassing is pressure treated with Tanalith E, or similar, timber preservative. These timbers are intended for use above the ground DPC but where the timber may be subjected to the risk of occasional wetting. Therefore, all cut ends should be resealed with the appropriate end-treatment, e.g. end-grain wood preservative should be used on any cross-cut carcassing.
Large timber stocks
Good quantities of 75mm carcassing stock are kept, pricing is competitive and enquiries are welcomed for pack quantities. Because stock turn is good across most of the 75mm range, we usually keep back-up stock in the Yard. Replenishment from the docks normally takes 3-5 days.
Stocks normally kept in Yard for 75mm x 200mm:
75mm x 200mm (8x3 in Imperial measurements) at 3.6 metres
75mm x 200mm (8x3 in Imperial measurements) at 4.8 metres
75mm x 200mm (8x3 in Imperial measurements) at 6.0 metres
Larger timbers, such as 6" x 3", sometimes comprise of two timber lengths being finger jointed with no loss of strength or structural integrity
| Certification | PEFC |
|---|---|
| Lead time | 1-2 Days |
Write Your Own Review
