50 x 75mm (fin.38 x 63) CLS Treated C16 4.8m
Product Code:
CK_040X075_4.8
50 x 75mm (fin.38 x 63) CLS Pressure Treated C16 (PEFC Certified), 4.8m
Overview of CLS Timber
Our CLS carcassing stock is available in sizes 75mm (3x2) and 100mm (4x2). CLS timber is normally used for studwork partitions and so we keep 2.4 metre lengths for interior and 4.8 metre for exterior builds. Stocks are normally graded at C16, sometimes C24 and PEFC sourced. PEFC sourcing confirms that the timber has been supplied from a sustainable source
75mm x 50mm (3x2) at 2.4 metres untreated (finish size usually 69mm x 38mm)
75mm x 50mm (3x2) at 4.8 metres pressure treated (finish size usually 69mm x 38mm)
100mm x 50mm (4x2) at 2.4 metres untreated (finish size usually 89mm x 38mm)
100mm x 50mm (4x2) at 4.8 metres pressure treated (finish size usually 89mm x 38mm)
The uses of CLS Timbers
Our CLS timber is Kiln Dried (KD) then planed and regularised for a smooth and consistent finish. It is more pleasant to handle than most sawn carcassing. Common uses are for building internal partitions, stud walling and timber framework construction. The pressure treated (aka tanalised) lengths are also sometimes used for exterior fencing rails. If this is the case we also recommend adding extra preservative and Ronseal End Grain protector for any cross cuts
| Material | Timber |
|---|---|
| Lead time | days |
Write Your Own Review
![47 x 75mm KD 4RC Pressure Treated Regularised C16 (PEFC Certified) 3.0m [13E]](https://www.southern-timber.co.uk/media/catalog/product/placeholder/default/watermark.jpg)
