50x50 Corner Tanalised 2.4m
Product Code:
PART_050X050_CS_DRG966_SVW
Product Code:
PART_050X050_CS_DRG966_SVW
In addition to profiled (shiplap, loglap etc.) boards we also carry square-edge timber machined from quality redwood. This pareticular product, L-Shaped corner, is designed to cover exposed corner timbers. Cross cut lengths of cladding are always liable to absorb moisture. Now we can offer, and recommend, treating any end cuts with ronseal end treatment and covering the ends with a vertical length of corner strip.
Tanalised timber (more correctly labelled referred to as ‘Pressure Treated’) are timbers which have been pressure treated with preservative. This treatment helps protect the timber against decay and fungal attack and provides an increased service life. All cross-cuts should be treated twice with end-grain preservative.
This product is pressure treated using Next generation TANALITH E wood preservative which provides a 15 year TREATED-RIGHT Performance Warranty against wood decay and insect attack (terms and conditions apply)
These Corner Strip lengths are all currently supplied at 2.4 metre length. We do show some timber boards priced per metre for comparative purposes. However we do not sell 1.0 metre length timbers
Our normal stocks of PSE, and some typical applications, uses include:
Ex.19mm x 38mm – fine slats for bespoke slatted fencing
Ex. 25mm x 50mm – for heavier duty lattice fences
Ex. 25mm x 75mm – bespoke pale, aka picket, fences
Ex. 25mm x 100mm – use horizontally with 150mm for ranch fence
Ex.25mm x 150mm – use horizontally with spaces for ranch, or, hit and miss
Ex.25mm x 175mm – ridge boards, soffits, fencing
Ex. 32mm x 200mm – ridge boards and fascia on larger timber buildings
Ex.50mm x 50mm – L shaped corners for timber building 90 degree externals
Finish | Planed |
---|---|
Material | Timber |
Lead time | days |