900 x 900mm (3ft x 3ft) Round Top Pale Gate Tanalised
Product Code:
GA_G_ROUND_3SVW
Product Code:
GA_G_ROUND_3SVW
3' x 3' approx. (900 x 900mm) Round Top Pale Gate, Tanalised
Round Top Pale gates are popular where privacy is not an issue. These pale gates are made to match our ready-made pale panels as closely as possible. Therefore, all materials used are selected from our normal high quality fencing range. Please note that due to circumstances beyond our control we had to change panel suppliers in early 2019. However, our new style pale gates and panels are supplied by the same manufacturer.
These gates are constructed using pressure treated and smooth planed timber. The pales are also referred to as slats and/or pickets. They are spaced ‘hit one, miss one’ so that gaps between the slats are approximately the same width (69mm) as the upright timbers. However, there are some limitations on pale spacing because of the gates 900mm width. All our Pale gates are made using five round top pales, tanalised rails (28mm x 70mm) and two gate stiles. The gate stiles finish at 45mm x 70mm and are secured to the horizontal framing with mortice and tenon joints. The gate stiles are cut to the same profile as the round top pales to present a uniform appearance.
Round top pale gates are stocked in the following sizes:
• 0.9m high x 0.9m wide (approx. 3’ x 3’).
• 1.2m high x 0.9m wide (approx. 4’ x 3’);
• 1.8m high x 0.9m wide (approx. 6’ x 3’);
We also keep a selection of planed, tanalised pales in stock with a choice of planed and sawn materials. These are for you, or a tradesman, to construct your own bespoke gate if required.
Finally although the gate timbers are pressure treated with Tanalith preservative, they can be enhanced further with Osmo Natural Woodstain or Osmo Country Colour. Similarly, a comprehensive range of gate furniture including T-hinges, padlocks and latches is kept in stock. Product includes 15 Year Treated-Right Performance Warranty from Araxda.
Lead time | 2-7 days |
---|