25 x 50mm Sawn Treated Batten
Product Code:
CA02_25X050_TALL_PEFC
25 x 50mm Sawn Pressure Treated Batten (PEFC Certified) per metre
Roofing timber baten sizes
We normally keep four different section sizes of batten in stock, the 25mm x 38mm Battens being a mid-range batten. We also supply 19mm x 38mm, two different grades of 25mm x 50mm roofing batten and a 38mm x 50mm for roofing or cladding
Minimum batten sizes for the common roof coverings can be summarised as follows.
A roof with rafter centres up to 450mm centres means all tile roof coverings and fibre-cement slate should use 25mm x 38mm battens.
The heavier natural slates should use 25mm x 50mm. For a roof with rafter centres up to 600mm then 25mm x 50mm battens should be used for natural and fibre-cement slate, interlocking clay and concrete tiles.
Plain tiles should use 25mm x 38mm battens.
These timbers are all pressure treated with Tanalith E, or similar, timber preservative. It is important to the durability of the batten that any cross cuts are treated with two coats of end-grain treatment are applied.
These timbers are tanalised for situations where the timber may be subjected to the risk of wetting from rain, but they are not intended for use in ground contact.
| Certification | PEFC |
|---|---|
| Material | Timber |
| Lead time | 1-2 Days |
Write Your Own Review
