1.8x1.2m (6x4ft) Oasis Wave Lattice Top Panel
Product Code:
PAN_OAS04-FSC
1.8m x 1.2m (6 x 4ft) Oasis Wave Lattice Top Panel (FSC), AOS04-FSC
The Oasis European panels are replacements for the predecessor panel, the Omega. The Oasis panels have horizontal slats and a wave effect for the lattice tops. Both panel ranges (Omega and Oasis) are top quality products, but the Oasis products have a shorter supply chain giving us better control over stock levels. This text describes the 1.8 x 1.2 metre panel
Oasis Fence Panel construction
There are 4 heights available: 1.8m; 1.5m; 1.2m and 0.9 metre. Panels are constructed using 45mm x 45mm softwood framing. These frames are constructed with open mortice and tenon joints which provide the panels with rigidity
The slats for the panels are 8mm thick and 95mm, and all timber components in these panels are pressure treated for longevity.
One indication of the panel’s quality, the panel slats are fixed with stainless steel screws. Lattice panels use stainless steel staples for sewcuring the battens. These stainless screws are less likely to react with the timber preservative. Other metals will tend to react with the preservative and lead to an unsightly bleeding on the panel surface
Oasis Fence Panel Design
There are four heights available 1800mm, 1500mm, 1200mm. and 900mm. In common with most of our planed-finish panels the Oasis Panels feature 45mm x 45mm softwood framing. These frames are constructed with open mortice and tenon joints which provide the panels with rigidity
The slats for the panels are 8mm thick and 95mm, and all timber components in these panels are pressure treated for longevity. These slats are fixed with stainless steel screws. These stainless screws are less likely to react with the timber preservative. Other galvanised, and sherardised screws can react with the preservative and may lead to an unsightly bleeding on the panel surface
The Oasis lattice top panels combine the benefit of a privacy panel with a 300mm diamond latticework window. These panels are decorative but offer durability by combining a robust specification, quality materials and pressure treated timbers. Also available to complement the panels are a range of European designer gates.
European Panel Manufacture
The fencing Horizontal slats are machined to a smooth finish and then secured with vertical battens. This helps to produce a sturdy privacy panel that reduces wind load by allowing some air to pass through the structure. Each panel is topped with a diamond lattice which gives some privacy without restricting too much light into the garden.
The lattice slats are 11mm x 27mm and they are spaced and secured to create latice windows of 50mm.
These quality fence panels are finished with a channelled frame around all panel edges. The panels are manufactured in Eastern Europe and then exported to the Eastern coast of England for distribution
All our fence panels are pressure treated with preservative to increase service life. These fencing panels are pressure treated with a light green preservative which mellows in colour when exposed to daylight.
The panels can be installed with sawn, or planed, 100mm (4”) posts. We also stock incised 100mm posts which come with a Manufacturer’s 15-Year warrant. Other associated products include quick-setting Postcrete, Clips, Gates, Osmo Natural Woodstains and sawn, or planed, Gravel Boards.
Panel Size Options
Half-panels are not available, but different size panels can be cut down to size. Our Trade customers usually place batten down both faces of the panel at the desired size and then saw the panel down to whatever is required.
Panel size (OAS0900) 1.8 metre wide x 900mm high (approx. 6' wide x 3' high)
Panel size (OAS04) 1.8 metre wide x 1.2 metre high (approx. 6’ wide x 4’ high)
Panel size (OAS05) 1.8 metre wide x 1.5 metre high (approx. 6' wide x 5' high)
Panel size (OAS06) 1.8 metre wide x 1.8 metre high (approx. 6’ wide x 6’ high)
If you want any more details feel free to contact or visit us.
| Lead time | days |
|---|
Write Your Own Review
